谁能帮我把这个英文(化学)翻译成中文啊

2025-03-30 11:11:25

推荐回答（2个）

回答1：

实验性材料丙烯酸酯acid(AA)?supplied 由北京化工Regent Co?China?was 由真空蒸馏净化并且由NaOH?The 中立化程度的水溶液中立化AA 被定义和: ND = (Nb/Na)□00??where Nb 和Na 是Na0H 痣并且AA, respectively?Triple 蒸馏水有具体导率

回答2：

EXPERIMENTAL
Materials
Acrylic acid(AA)，supplied by Beijing Chemical Regent Co．China，was purified by vacuum distillation and neutralized by an aqueous solution of NaOH．The neutralization degree of AA is defined as: ND= (Nb/Na)×1 00％，where Nb and Na are the moles of Na0H and of AA,respectively．Triple distilled water has specific
conductance<0．5s-1cm-1． Commercially available kerosene was treated with activated carbon and filtered for several times before use．Emulsifier，a blend of Span 80 and Op10，obtained from Beijing Chemicals Co．，and photoinitiator，2,2一dimethoxy一2一phenylacetophenone(DMPA)obtained from Changzhou Huatai Chemicals，Co．，were used as received．
Preparation ofInverse Emulsion
Aqueous solution of monomer was dispersed in kerosene with proper amounts of emulsifier Span 80 and Op l 0，stirring to form water—in—oil emulsion．Before dispersing，the water phase and oil phase were bubbled with purified nitrogen for about 20 min，respectively．
Photopolymerization Procedure
Figure 1 displays the schematic diagram of photopolymerization device．Upon purging with nitrogen，the photopolymerization was conducted in a cylindrical quartz reaction vessel(5cm(Φ)×9cm(h))under irradiation．A certain amount of photoinitiator dissolved in kerosene was injected into the reaction vessel through the sample inlet before iradiation．The temperature for the inverse emulsion polymerization was automatically controlled at a designated value within a fluctuation of±l℃ by circulating cool water through a jacketed—vesse1．

CoNCLUSIoNS
Photoinitiated inverse emulsion polymerization of sodium acrylate can be completed in a quite rapid
polymerization rate and reaches a high conversion in a short time compared with thermal initiated
polymerization．The resulted polymer has a molecular weight as high as l 0 ． Nucleation Occurs mainly inside
monomer droplets，which acts as a mi croreactor of solution polymerization．The polymerization is influenced by
photoinitiator concentration，incident light intensity， initial monomer concentration．emulsifier content and
reaction temperature．etc．The effect of initiator absorption is the main cause of decreasing the polymerization
rate at high initiator concentration．At the low pH value of water phase．the polymerization rate reduces evidently
but changes slightly at alkaline medium．The electrostatic interaction between macroradica1 and monomer can be
a reasonable explanation for this evident reduction．

孩子数学比较差，怎样才能提高数学成绩呢？

vivo x5max软件管理手势怎么改变

从东营到济南火车站多少公里

平度市蓼兰镇何家店离平度市明村镇前楼殷家庄子有多少公里？

笔记本键盘按b变成5b按n变成6n 数字8和2按下去都是82

为什么人民币第四版是错版币？

仙剑奇侠传4迷宫地图

冷冻海鲜进口报关清关需要注意哪些事项

华师大mta怎么样？好考嘛？他的费用是多少？