用74HC595驱动16×16点阵显示中文 C语言程序和仿真 谢谢！！！

这个图片会压小。看大图到这看

http://0e.images22.51img1.com/6000/kgd235143/e4be871c454f0c1d6f7f46b964dacee7.jpg

要仿真的话我发给你，当然实际电路要三极管驱动

#include 

#define uchar unsigned char

uchar i,j,k=15;

sbit  xsi=P2^0;

sbit  xrck=P2^1; 

sbit  xsck=P2^2;

sbit  ysi=P2^3;

sbit  yrck=P2^4; 

sbit  ysck=P2^5;

sbit kg= P3^2;

uchar code zbm[][32]={

{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,

0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,},

{0xFF,0xFF,0xFF,0xF7,0xBF,0xF7,0xBF,0xFB,0xBF,0xFD,0x03,0xE0,0xFF,0xFF,0xFF,0xFF,

0x01,0xF0,0x7F,0xEF,0xBF,0xEF,0x9F,0xEF,0xDF,0xEF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF},/*"北",0*/

{0xF7,0xFF,0xF7,0xFF,0xF7,0xEF,0xF7,0xF3,0x37,0xFF,0xB7,0xFE,0xB6,0xDE,0xD5,0x80,

0xDB,0xFE,0x5B,0xFF,0x9B,0xFB,0xFB,0xF7,0xFB,0xE7,0xFB,0xFF,0xFF,0xFF,0xFF,0xFF},/*"京",1*/

{0xFF,0xEF,0x5F,0xF7,0xDF,0xFA,0xEF,0xFD,0x0F,0xFA,0xFF,0xDF,0xBF,0xEF,0xC7,0xF3,

0x58,0xFC,0xEF,0xFB,0xAF,0xF7,0xCF,0xEF,0xEF,0xCF,0xFF,0xDF,0xFF,0xDF,0xFF,0xFF},/*"欢",2*/

{0xBF,0xF7,0xBF,0xF7,0xBB,0xF6,0x37,0xF1,0xFF,0xF7,0x07,0xF6,0xF7,0xF6,0x7B,0xF7,

0xF9,0xEF,0x0F,0xE8,0xF7,0xEF,0x77,0xCF,0x07,0xCF,0xFF,0xEF,0xFF,0xEF,0xFF,0xFF},/*"迎",3*/

{0xFF,0xFE,0x7F,0xFF,0xBF,0xFF,0x0F,0xC0,0xF1,0xFF,0xFF,0xF7,0xBF,0xF9,0xCF,0xEF,

0xD1,0xDF,0x5F,0xC0,0xEF,0xFF,0xAF,0xFD,0xCF,0xFB,0xFF,0xF3,0xFF,0xFF,0xFF,0xFF},/*"你",4*/

0x87,0xFF,0x03,0xFF,0x01,0xFE,0x00,0xF8,0x01,0xF0,0x01,0xE0,0x03,0x80,0x07,0x00,

0x07,0x00,0x03,0x80,0x01,0xE0,0x01,0xF0,0x00,0xF8,0x01,0xFE,0x03,0xFF,0x87,0xFF,/*"心",5*/

{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,

0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,},

};

uchar code zbm1[][16]={

{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},

{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,},

{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x1F,0xC0,0x6F,0xDB,0x63,0xEB,0x6C,0xEB},

{0xEF,0xEF,0xEF,0xDF,0x0F,0x80,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},/*"自",0*/

{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x3B,0xF0,0xBB,0xEF,0xBB,0xEF,0xBB,0xEF,0xDD,0xEF},

{0xCD,0xEF,0xF1,0xEF,0xFF,0xEF,0xFF,0xEF,0xFF,0xEF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF},/*"己",1*/

{0x7F,0xFF,0xBF,0xFF,0x0F,0xC0,0xD1,0xFF,0xDF,0xF1,0x01,0xF6,0xEF,0xF6,0xEF,0xE8},

{0x3F,0xF7,0xCF,0xFA,0xD1,0xFD,0x1F,0xFA,0xEF,0xE7,0xEF,0xEF,0xFF,0xEF,0xFF,0xFF},/*"做",2*/

{0xFF,0xFF,0x3F,0xF8,0x9F,0xE6,0xAF,0xF6,0xD3,0xF7,0x1F,0xE0,0x7F,0xFF,0xBF,0xFF},

{0x5F,0xFF,0xC7,0xFC,0xD9,0xEF,0xEF,0xDF,0x0F,0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},/*"的",3*/

{0xFF,0xFF,0x3F,0xCF,0x3F,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},/*":",4*/

{0xF7,0xDF,0x07,0xC0,0xF7,0xDF,0xFF,0xDF,0xFF,0xDF,0xFF,0xDF,0xFF,0xCF,0xFF,0xFF},/*"L",0*/

{0xF7,0xDF,0x07,0xC0,0x77,0xDF,0x77,0xDF,0x17,0xDC,0xF7,0xDF,0xEF,0xE7,0xFF,0xFF},/*"E",1*/

{0xF7,0xDF,0x07,0xC0,0xF7,0xDF,0xF7,0xDF,0xF7,0xDF,0xEF,0xEF,0x1F,0xF0,0xFF,0xFF},/*"D",2*/

{0xFF,0xDF,0xFF,0xE7,0xFF,0xFF,0xFF,0xFF,0x7F,0xF4,0x7F,0xED,0x81,0xFD,0xB7,0xFD},

{0xB7,0xF5,0xBB,0xED,0x3B,0xFE,0xFF,0xF7,0xFF,0xEF,0xFF,0xCF,0xFF,0xFF,0xFF,0xFF},/*"点",3*/

{0xFF,0xFF,0x03,0xE0,0xBB,0xFF,0x6D,0xFF,0x11,0xFB,0xFF,0xFB,0x37,0xFB,0x57,0xFB},

{0x67,0xFB,0x19,0x80,0xBB,0xFD,0xBB,0xFD,0xBF,0xFD,0xFF,0xFD,0xFF,0xFD,0xFF,0xFF},/*"阵",4*/

{0xFF,0xEF,0xFF,0xF7,0xFF,0xF9,0x7F,0xFE,0x81,0xBD,0x75,0xDD,0x65,0xE5,0x55,0xF8},

{0xB6,0xFD,0x9A,0xFD,0x28,0x80,0xBC,0xFE,0xBF,0xFE,0xFF,0xFE,0xFF,0xFE,0xFF,0xFF},/*"屏",5*/

{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},

{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,},

};

void ys (uchar a) //延时

{

uchar b;

for (;a>0;a--)

for (b=100;b>0;b--) ;

}

void yfs() //Y轴发数

{

ysck=0;

yrck=0;

k++;

if (k==16)

 {

k=0;

ysi=0;

 }

 else

ysi=1;

ysck=1;

P2=P2|0X14;

//相当于   xrck=1;  yrck=1;

}

void xfs(uchar a)   //X轴发数

{

uchar b,a1,a2;

a1=~zbm[6][a*2+1];

a2=~zbm[6][a*2];

xsck=0;

xrck=0;

for (b=0;b<8;b++)

{

a1=a1<<1;

xsi=CY;

xsck=1;

xsck=0;

}

for (b=0;b<8;b++)

{

a2=a2<<1;

xsi=CY;

xsck=1;

xsck=0;

}

}  

void  fs(uchar a)      //X轴发数

{

uchar b;

xsck=0;

xrck=0;

for (b=0;b<8;b++)

{

a=a<<1;

xsi=CY;

xsck=1;

xsck=0;

}

}

void gdhs(uchar *zz,uchar N,uchar Time) //流动显示N个汉字    滚动函数

{ //参数三个：字符串字模首地址、字数、显示流动速度 

uchar FontNum,i,j,row; //循环变量，字数计数、16次流动、16列扫描 

for(FontNum=0;FontNum

{ 

for(i=0;i<16;i++) //字到字流动 16次左移才能完成 

{ 

for(j=0;j

{ 

k=15;

for(row=0;row<16;row++) //显示16*16屏幕一次 

{ 

yfs(); //选通显示列  //行选线，P3 低四位 

fs (~*(zz+FontNum*32+(i+row)*2+1)); //以移动偏移为基础获取新数据 

fs(~*(zz+FontNum*32+(i+row)*2)); //获取显示数据 循环显示关键算法 

ys (12); //适当延时 

} 

} 

} 

} 

}

void wbzd ()  interrupt   0   //外部中断

{

  j++;

  if (j>1)

  j=0;

  ys(10);

  while (!kg)

  {

   k=15;

  for (i=0;i<16;i++)

  {

   yfs();

   xfs(i);

ys(10);

   }

  }

if (j==0)

   gdhs(zbm,8,2);

if (j==1)

gdhs(zbm1,10,1);

}

void main ()

{

EA = 1; //打开总中断 

EX0=1;

IT0=1;

while (1)

{

     if (j==0)

   gdhs(zbm,8,5);

  if (j==1)

     gdhs(zbm1,10,3);

}

}

/*****************************************************
16*128 LED点阵屏 C 程序
******************************************************
声明：
本程序供大家学习之用，用勿用于商业用途。尊重版权。

编写：邓椿薪
时间：2006年1月20日 晚
邮箱：love2151@xinhuanet.com
*******************************************************

//595连级输出数据，138行驱动。P0_1为移动速度高速/*点阵显示汉字程串口输出字符数据，
//P2口输出行扫描信号,P2_7输出595锁存信号。*/

#define uchar unsigned char
#define uint unsigned int

#include
#include

uchar yid,h,d=12; //YID为移动计数器，H为行段计数器。
uint zimuo,zimuo1; //字模计数器

uchar BUFF[18]; //缓存
void in_data(void); //调整数据
void rxd_data(void); //发送数据

void in_data1(char h);
void rxd_data1(void);
void sbuf_out1(void);

void sendsw(uchar k); //发送段代码
void sbuf_out(void); //16段扫描
void key(void);

sbit AN1=P3^4;
sbit AN2=P3^5;

sbit clk=P3^3;

unsigned code sw[16]={0x7f,0x6f,0x5f,0x4f,0x3f,0x2f,0x1f,0x0f,0xf7,
0xf6,0xf5,0xf4,0xf3,0xf2,0xf1,0xf0}; /*16行段码*/

/********************************************/
void main(void)
{ uchar i;
zimuo1=sizeof(hanzi)-6*32;//(zishu+9)*32;
yid=0;
zimuo=0;
while(1)
{
while(yid<100) //数据移位。
{
for(i=0;izimuo1) //总数减7个字。
zimuo=0;
}

}

void sbuf_out1()
{
char i;
for(h=0;h<32;h++)
{

in_data1(h);
clk=1;
rxd_data1();
if(h>=16)
else i=h;
sendsw(sw[i]);

}

}

/******************************************************/

void in_data1(char h)
{
char s,i;
if(h>=16)
{i=(h-16);

for(s=5;s>=0;s--) //h为向后先择字节计数器，zimuoo为向后先字计数器
{
// if(zimuo%32)
BUFF[2*s+1]=hanzi[zimuo+1+32*s+2*i]; //把第一个字模的第一个字节放入BUFF1中,第二个字模和第一个字节放入BUFF3中
BUFF[2*s]=hanzi[zimuo+0+32*s+2*i]; // 把第一个字模的第二个字节放入BUFF0中,第二个字模的第二个字节放入BUFF1中
}
}
else
{
i=h;
for(s=5;s>=0;s--) //h为向后先择字节计数器，zimuoo为向后先字计数器
{
// if(zimuo%32)
BUFF[2*s+1]=hanzi[zimuo+1+32*s+2*i]; //把第一个字模的第一个字节放入BUFF1中,第二个字模和第一个字节放入BUFF3中
BUFF[2*s]=hanzi[zimuo+0+32*s+2*i]; // 把第一个字模的第二个字节放入BUFF0中,第二个字模的第二个字节放入BUFF1中
}
}

}

/*******************************************************/

void rxd_data1(void) //串行发送数据
{
char s;
for(s=0;s<10;s++) //发送5字节数据
{

SBUF=255-BUFF[s];//把BUFF中的字节从大到小移位相或后发送输出。
while(!TI);TI=0; //等待发送中断
}
}

void sendsw(uchar k)
{
TI=0;
SBUF=k;
while(!TI);TI=0;
clk=0;

}

void key(void)
{
uchar a,b;
if(AN1==0)
{
for(a=0;a<10;a++)
}
if(AN1==0)
{while(AN1==0)
{}
if(AN1)
{d++;
if(d>100)
d=100;
}
}
}
if(AN2==0)
{for(a=0;a<10;a++)
}
if(AN2==0)
{while(AN2==0)
{}
if(AN2)
{d--;
if(d==0)
d=1;
}
}
}
}
不是我写的，但我想会对你有用。

#include
#include < intrins.h >
#define uchar unsigned char
#define uint unsigned int
sbit clk=P0^5; //595移位时钟，上升沿触发
sbit rclk=P0^4; //595数据锁存信号，上升沿触发
sbit red=P0^6; //红色移位数据输入
sbit green =P0^7; //绿色移位数据输入
sbit OE=P2^7; //行扫描使能端，高电平有效
uchar wei; //左移一位记录
uint word; //显示字记录
uchar hang; //行扫描
uchar sec50; //左移时间
uchar speed; //速度值
void delay()
{
uchar q;
for(q=0;q<255;q++);

}
uchar code hanzi[][32]={

{0x06,0x40,0x38,0x50,0x08,0x48,0x08,0x48,0x08,0x40,0xFF,0xFE,0x08,0x40,0x08,0x48,0x0E,0x28,0x38,0x30,0xC8,0x20,0x08,0x50,0x09,0x92,0x08,0x0A,0x28,0x06,0x10,0x02},/*"我",0*/

{0x10,0x00,0x11,0xFC,0x10,0x08,0x10,0x10,0xFC,0x20,0x24,0x20,0x24,0x20,0x27,0xFE,0x44,0x20,0x64,0x20,0x18,0x20,0x08,0x20,0x14,0x20,0x26,0x20,0x44,0xA0,0x80,0x40},/*"好",1*/

{0x10,0x00,0x10,0xFC,0x10,0x84,0xFE,0xFC,0x38,0x84,0x34,0xFC,0x54,0x84,0x50,0x84,0x90,0xFC,0x00,0x00,0x01,0x00,0x08,0x84,0x28,0x82,0x28,0x12,0x67,0xF0,0x00,0x00},/*"想",2*/

{0x00,0x00,0x0F,0xF0,0x08,0x10,0x0F,0xF0,0x08,0x10,0x0F,0xF0,0x00,0x00,0xFF,0xFE,0x01,0x00,0x09,0x00,0x09,0xF8,0x09,0x00,0x15,0x00,0x23,0x00,0x40,0xFE,0x00,0x00},/*"是",3*/

{0x00,0x00,0x1F,0xF0,0x10,0x10,0x10,0x10,0x11,0x10,0x11,0x10,0x11,0x10,0x11,0x10,0x11,0x10,0x11,0x10,0x11,0x10,0x02,0x80,0x04,0x60,0x18,0x18,0x60,0x08,0x00,0x00},/*"贝",4*/

{0x01,0x00,0x01,0x00,0x7F,0xFC,0x01,0x00,0x3F,0xF0,0x00,0x00,0x3F,0xFE,0x40,0x04,0x80,0x08,0x0F,0xC0,0x08,0x40,0x08,0x40,0x08,0x44,0x10,0x44,0x60,0x3C,0x00,0x00},/*"壳",5*/

{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x30,0x00,0x10,0x00,0x20,0x00,0x00,0x00},/*"，",6*/

{0x10,0x40,0xFE,0x40,0x10,0x78,0x7C,0x90,0x10,0x20,0xFE,0xFC,0x00,0x24,0x7D,0xFE,0x44,0x24,0x7C,0xFC,0x44,0x20,0x7C,0x20,0x44,0x20,0x44,0x20,0x54,0xA0,0x48,0x40},/*"静",7*/

{0x10,0x40,0xFE,0x40,0x10,0x78,0x7C,0x90,0x10,0x20,0xFE,0xFC,0x00,0x24,0x7D,0xFE,0x44,0x24,0x7C,0xFC,0x44,0x20,0x7C,0x20,0x44,0x20,0x44,0x20,0x54,0xA0,0x48,0x40},/*"静",8*/

{0x00,0x20,0x11,0x20,0x11,0x20,0x11,0x24,0xFD,0x3E,0x11,0xE4,0x17,0x24,0x11,0x24,0x11,0x24,0x11,0x34,0x11,0x28,0x1D,0x20,0x31,0x02,0xC1,0x02,0x00,0xFE,0x00,0x00},/*"地",9*/

{0x04,0x40,0xFF,0xFE,0x04,0x50,0x04,0x28,0x1F,0xFE,0x50,0x20,0x57,0xA8,0x75,0x2C,0x17,0xA8,0x74,0xA8,0x57,0x90,0x55,0x10,0x97,0xAA,0x20,0x4A,0x20,0x84,0x40,0x00},/*"藏",10*/

{0x02,0x00,0x02,0x00,0x7F,0xFE,0x04,0x00,0x04,0x00,0x08,0x40,0x18,0x40,0x17,0xFC,0x30,0x40,0x50,0x40,0x90,0x40,0x10,0x40,0x10,0x40,0x17,0xFE,0x10,0x00,0x00,0x00},/*"在",11*/

{0x20,0x40,0x10,0x40,0x10,0x40,0x01,0x50,0x41,0x48,0x2A,0x44,0x0A,0x42,0x14,0x40,0x10,0x44,0x20,0x44,0xE0,0x08,0x20,0x10,0x20,0x20,0x20,0xC0,0x23,0x00,0x2C,0x00},/*"沙",12*/

{0x00,0x00,0x3F,0xF0,0x00,0x20,0x00,0x40,0x00,0x80,0x01,0x00,0x01,0x00,0x01,0x04,0xFF,0xFE,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x05,0x00,0x02,0x00},/*"子",13*/

{0x3F,0xF8,0x21,0x08,0x21,0x08,0x21,0x08,0x3F,0xF8,0x21,0x08,0x21,0x08,0x3F,0xF8,0x01,0x00,0x01,0x00,0x3F,0xF8,0x01,0x00,0x01,0x00,0x01,0x00,0xFF,0xFE,0x00,0x00},/*"里",14*/

{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x30,0x00,0x10,0x00,0x20,0x00,0x00,0x00},/*"，",15*/

{0x20,0x80,0x3E,0xFC,0x28,0xA0,0x45,0x10,0x85,0x10,0x3F,0xF8,0x01,0x00,0xFF,0xFE,0x00,0x20,0x00,0x20,0x7F,0xFC,0x04,0x20,0x02,0x20,0x02,0x20,0x00,0xA0,0x00,0x40},/*"等",16*/

{0x10,0x40,0x18,0x40,0x13,0xFC,0x28,0x40,0x4C,0x40,0x88,0x40,0x17,0xFE,0x10,0x10,0x30,0x10,0x57,0xFE,0x10,0x10,0x11,0x10,0x11,0x10,0x10,0x10,0x10,0x50,0x10,0x20},/*"待",17*/

{0x20,0x20,0x10,0x20,0x10,0x20,0xFF,0xFE,0x0A,0x24,0x0A,0x20,0x12,0xF8,0x36,0x88,0x5A,0x88,0x96,0x50,0x12,0x50,0x12,0x20,0x12,0x50,0x12,0x48,0x12,0x86,0x15,0x04},/*"被",18*/

{0x10,0x00,0x10,0x40,0x10,0x40,0xFC,0xA0,0x11,0x10,0x13,0xE8,0x14,0x06,0x18,0x00,0x30,0x84,0xD2,0x44,0x11,0x48,0x11,0x10,0x10,0x20,0x17,0xFE,0x50,0x00,0x20,0x00},/*"捡",19*/

{0x08,0x00,0x08,0x00,0x08,0xF8,0x7E,0x08,0x08,0x08,0x08,0x08,0xFE,0xF8,0x08,0x80,0x48,0x80,0x4E,0x84,0x48,0x84,0x48,0x7C,0x48,0x00,0xA8,0x00,0x9F,0xFE,0x00,0x00},/*"起",20*/

{0x10,0x80,0x10,0x80,0x20,0x80,0x7C,0xFC,0x45,0x04,0x45,0x04,0x46,0x04,0x7C,0x84,0x44,0x44,0x44,0x64,0x44,0x24,0x44,0x04,0x7C,0x04,0x44,0x28,0x40,0x10,0x00,0x00},/*"的",0*/

{0x00,0x00,0x7E,0x7E,0x12,0x44,0x12,0x48,0x7E,0x48,0x12,0x50,0x12,0x48,0x7E,0x44,0x12,0x42,0x12,0x42,0x22,0x52,0x22,0x4C,0x42,0x40,0x8A,0x40,0x04,0x40,0x00,0x40},/*"那",21*/

{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x7F,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"一",22*/

{0x08,0x04,0x06,0x04,0x04,0x04,0x7F,0xA4,0x10,0x24,0x22,0x24,0x7F,0x24,0x26,0x24,0x0C,0xA4,0x19,0xE4,0x33,0x24,0xC6,0x04,0x09,0x04,0x31,0x84,0xC1,0x14,0x00,0x08},/*"刻",23*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
};

void senddata(uchar datat)//发送子程序
{
uchar k;
for(k=0;k<8;k++)
{
clk=0;
red=(datat&0x80);
green=(datat&0x80);
datat<<=1;
clk=1;
}
}
void sendwei(void)
{
uchar i,j;
uchar huancun1,huancun2;
bit bdata l=0;
huancun1=hanzi[word][hang*2];
huancun2=hanzi[word][hang*2+1];
j=wei;
if(j>=7)
{
senddata(huancun1);
j=j-7;
l=1;
}
for(i=0;i {
if(l==1)
{
red=(huancun2&0x80);
green=(huancun2&0x80);
clk=0;
huancun2<<=1;
clk=1;
}
else
{
red=(huancun1&0x80);
green=(huancun1&0x80);
clk=0;
huancun1<<=1;
clk=1;
}
}
}
void sendhang(void)
{
delay();
OE=0;
P0&=0xf0;
P0|=hang;

}
void clearpingandinit(void)
{
uchar j,k;
P0=0x00;
hang=0x00;
word=0x00;
wei=0x00;
sec50=0x00;
speed=0x0f;
for(k=0;k<8;k++)
{
for(j=0;j<8;j++)
{red=0;green=0;
clk=0;
clk=1;}
}
rclk=0;
rclk=1;
TMOD=0x11;
TCON=0x00;
IE=0x8A;
IP=0x08;
TH0=0xF5;
TL0=0x16;
TH1=0xfa;
TL1=0x98;
}
void timer0() interrupt 1
{
uchar n,m;
OE=0;
TH0=0xff;
TL0=0x00;
if(word<=4)
{
for(n=5-word;n>0;n--)
{
senddata(0x00);
senddata(0x00);
}
}
if(word<=4)
m=0x00;
else
m=word-5;
for(n=m;n {
senddata(hanzi[n][hang*2]);
senddata(hanzi[n][hang*2+1]);
}
sendwei();
sendhang();
rclk=0;
OE=0;
hang++;
if(hang>=16)
{
hang=0;
}
rclk=1;
}
void timer1() interrupt 3//定时器1中断入口,这里是制位速度
{
TH1=0xfa;
TL1=0x98;
sec50++;
if(sec50==speed)
{
sec50=0x00;
wei++;
if(wei>=16)
{
wei=0;
word++;
if(word==29)
{
word=0;
}
}
}
}
void clearsuocun(void)
{
uchar i,j;
clk=1;
rclk=1;

for(i=0;i<8;i++)
{
for(j=0;j<8;j++)
{
green=0;
red=0;
clk=0;
clk=1;
}
}
rclk=0;
rclk=1;
}
void main(void)
{
clearpingandinit();
TR0=1;
TR1=1;
while(1)
{
EA=1;
clearsuocun();
EA=0;
}

}